Tuesday, September 07, 2010

Interior Coming Together

The interior on the Mustang is starting to come together with some slow and patient work by the "Chief Mechanic" (me). Slowed down mainly by the poor workshop facilities (my bathroom) and the lazy and incompetent staff (me again), it's been a slow process. Luckily, the addition of the e46 has taken the pressure of the Mustang so things can stay apart for longer.

The first step was the completion of the interior panels. The paint on the trims and new arm rests made a huge difference for what was small change. The door trim panels themselves are still the old ones. I just gave them a bit of a clean and stuck them back in. Yes, they have a crack or two and all the chrome is gone, but they still look decent enough.

With the panels done, it was on to the steering wheel which I had previously prepared with a few coats of varnish. The wheel itself went in quite easily and looks awesome. The horn button is a piece of work though! The pieces they sent didn't seem to work and then the wheel itself came with a different electrical connector which was supposed to solve the problem. Don't get me wrong, the button makes the horn work fine; it just keeps the horn on continuously which can be a little annoying and distracting for other drivers! I think I have a work-around involving electrical insulation tape, some drilled out washers and a great deal of swearing.




Finally, the front seats. I purchased some new vinyl upholstery and after reading the instructions in the "trusty" Ford workshop manual, got to it. The work shop states (roughly) "Remove existing upholstery and install new upholstery with dog clips." Yes, that is what I did. It just neglected to mention the multi-layer install, removing securing wires and the amount of skin I lost on those bloody dog clips. The results were well worth it in the end and I no longer cut my rear just getting in on those old seats.




Still to come, headliner, front end suspension (can anyone say "Unsafe at any speed"?) and new tyres. Fun, fun, fun!

No comments: